The Sorinex NP3™ Adjustable Bench is the premier bench in our industry. Known for its durability and portability, it is adjustable to 6 positions; 0 ÌŠ, 15 ÌŠ, 30 ÌŠ, 45 ÌŠ, 60 ÌŠ, 75 ÌŠ. Urethane wheels and an integrated vertical rubber storage stopper make this bench extremely versatile and easy to move in and out of working areas. Brand your bench to your rack and make it stand out with colors and logos unique to your program.
The entire frame is constructed of 11-gauge and 7-gauge 2″ square steel bent tubing with but-type miter corners and 70,000 PSI full-pass mig welds all open ends capped with welded-on steel/ rubber caps. All uprights are supported and gusseted for maximum integrity. All attachment bolts are 1/2″ diameter grade #5 with anti-vibration locking systems. Integrated urethane wheels. Wide set 10″ bearing blocks for 3⁄4″ pivot pin to ensure back pad stability and longevity. Flat stock, gravity-activated angle support. Minimal gap (1 1/2″) area between seat and back pad when bench is in 0 ÌŠ (horizontal) position. Bench pads are made with 3/4″ birch plywood backboard with all corners and edges rounded; 1″ thick high-density, non-moisture absorbing, closed-cell rebound foam covered with fully-sewn premium naugahyde leather. Bench can be stored in upright position when not in use.