Rogue 12-Sided Urethane Grip Plates

Rogue 12-Sided Urethane Grip Plates
Rogue 12-Sided Urethane Grip Plates
Rogue 12-Sided Urethane Grip Plates
Rogue 12-Sided Urethane Grip Plates
Rogue 12-Sided Urethane Grip Plates
Rogue 12-Sided Urethane Grip Plates

We test and review fitness products based on an independent, multi-point methodology. If you use our links to purchase something, we may earn a commission. Read our disclosures.

PRODUCT HIGHLIGHTS

Rogue’s new 12-Sided Urethane Grip Plates feature a solid cast iron core, impact-resistant polyurethane coating, and a black matte finish with white Rogue emblems on each side. Built with two ergonomic interior handles, this unique design allows for easier carrying, loading and offloading, while the not-quite-round circumference helps to prevent rollaway when a barbell's on the floor. Categories: Metal Plates

Product Summary

Rogue’s new 12-Sided Urethane Grip Plates feature a solid cast iron core, impact-resistant polyurethane coating, and a black matte finish with white Rogue emblems on each side. Built with two ergonomic interior handles, this unique design allows for easier carrying, loading and offloading, while the not-quite-round circumference helps to prevent rollaway when a barbell’s on the floor.

The tolerance on these plates is +/- 1% for the 25LB and up, and +/- 3% for the change plates. The minimum thickness of the protective urethane coating is 4mm.

Please Note: Grip Handles are NOT included on the 2.5LB and 5LB change plates.

Internal hand grips on opposing ends of each plate (10LB and above) allow athletes to safely and efficiently pick up, carry, load, and offload them from any angle.

When a bar hits the floor, its journey should end there. Rogue’s 12-Sided Urethane Grip Plates look and function essentially like traditional round Oly plates, but with the edged circumference, there is greatly reduced movement on the ground, even on uneven surfaces. It’s a simple solution to the age-old rollaway nuisance.

These plates include a 50.6MM collar opening with a solid cast iron core for reliable structural integrity, a protective high-quality polyurethane coating (minimum 4MM thick), and a sleek matte black finish with raised numbering for the weight and Rogue branding. Tolerance on the 25/35/45LB plates is +/- 1%, while the tolerance on the change plates (2.5/5/10LB) is +/- 3%.

Specs

Collar Opening50.6MM
Weight Tolerance'+/- 1%
Type2.5-lb-pair, 5-lb-pair, 10-lb-pair, 25-lb-pair, 35-lb-pair