Rogue Monster Lite/Infinity Monolift Attachment

Rogue Monster Lite/Infinity Monolift Attachment
4.7/5

Builtscore

4.7142857142857 out of 5 based on 7 customer ratings
Based on 7 Ratings

We review free products that we receive and participate in affiliate programs, where we may be compensated for items purchased through links from our site. See our disclosures page for more information.

PRODUCT HIGHLIGHTS

The rack-mounted Rogue Monolift Attachment is compatible exclusively with our Infinity and Monster Lite Series, and offers a great cost-efficient alternative to expensive, full-scale monolift units. Sold in pairs, these 0.

Manufacturer: Category:
Made in USA

Product Summary & Specs

The rack-mounted Rogue Monolift Attachment is compatible exclusively with our Infinity and Monster Lite Series, and offers a great cost-efficient alternative to expensive, full-scale monolift units. Sold in pairs, these 0.75″ thick steel hooks are designed with special counterweight handles at the top, so when you lift a barbell off the Monolift, the hooks will swing several inches back toward the rack and stay there. This clears up enough extra space to go straight into your squats or other lifts without having to walk the bar out from the rack. Re-racking is also easy, as the slanted angle of the unloaded hooks allows you to guide the bar in, swinging the Monolift back into its original position.The Monolift Attachments can be mounted to any Infinity or Monster Lite upright using the included 0.625″ hardware. Mounting holes on the unit itself are 0.625″ diameter and 1″ on center. Once set up, the hooks have two adjustment positions that allow for height changes as small as 0.5″ increments. Rogue’s design also includes a “backstop” bolt above each primary hook bolt, ensuring that the Monolift won’t move further away from the rack while the user is setting up. This feature is not found on comparable attachments on the market.Each Monolift hook, or jaw, has a 1.25″ high lip and a front-to-back depth of 2.75″, making it compatible with nearly all standard barbells as well as some specialty bars like the Camber Bar and Safety Squat Bar. We’ve also sandwiched the hooks between two pieces of 0.5625″ Thick UHMW Protective Plastic–which not only protect the bar’s knurl and finish, but also make it easier for the user to slide the bar left or right into the correct position before a lift.The Rogue Monolift Attachment is made in America and strong enough to handle a massive amount of weight. It’s designed to be safe for solo use, but for heavier lifts, it’s always recommended to have spotters available. Rogue also highly recommends mounting the Monolift to a rack or rig that’s securely fastened to the floor and/or wall.

Made In USA

Yes

Color

Black

Product Weight

62 LB (Pair)

Width

2"

Height

20"

Size Compatibility

3×3" Tubing 5/8" Hole

Weight Capacity

1,000 + LB

Other Product Specs

9/16" Thick UHMW Plastic, 5/8" Mounting Holes 1" on Center

GGR Reviews

Rogue Monster Lite/Infinity Monolift Attachment
Rated 4.7142857142857 out of 5 stars
7 ratings
GGR Builtscore: 4.7/5
Tried it? Review this product

Add a review

Use one of the allowed file type: jpg,png,gif. The max size allowed is : 5 MB.

    7 reviews for Rogue Monster Lite/Infinity Monolift Attachment

    Author Spotlight

    Coop is the creator of Garage Gym Reviews. He's produced more content on home gyms and training equipment than likely anyone else in the world and is recognized as the foremost expert in the space. When not writing about barbells, squat racks, and other pieces of equipment, he can be found eating tacos and reading biographies on dead people. Coop has been featured in prestigious publications such as The Art of Manliness, Starting Strength, Men's Health, Business Insider and many others.

    Author: Cooper Mitchell Contact: coop@garagegymreviews.com