We test and review fitness products based on an independent, multi-point methodology. If you use our links to purchase something, we may earn a commission. Read our disclosures.
The innovative Rogue Monster Slinger from Rogue Fitness has been released. This new cable-pulley and band resistance system will allow you to perform numerous exercises and perhaps save you space by not having a dedicated pulley system.
Rogue Fitness
The rack-mounted Rogue Monster Slinger™ is a new cable-pulley and band resistance system that can deliver the same training benefits of a traditional Lat Pulldown Machine with better space and cost efficiency. Compatible exclusively with Monster 2.0 Power Racks and the racked version of our Monster Rig 2.0, the Monster Slinger package includes adjustable components for set-up on a 90”, 100”, or 108” unit. Customers can also opt to add compatible Rogue attachment straps and bands to their order, sold separately. The Monster Slinger Base Unit includes: (2) Slinger Mounting Plates (2) 6" Cable Pulleys (1) 1/4" MIL Spec Cable with Rogue made hardware (1) Monster Attachment Post + Carabiner (1) Slinger Extension Strap (1) Slinger Band Sheath (2) Carabiners (2) Black Zinc 1" Monster Bolt Assemblies (2) Rubber Grommets Once installed, the front of the Slinger will extend approximately 7" out from the face of the upright it is mounted above, and approximately 7" above the top of that same upright. Optional Grip Strap & Carabiner Pair For customers planning to install the Slinger on a 108” tall rack, this add-on package can help compensate for the cable usage difference, allowing shorter athletes to have a freer range of motion and a more effective workout. The strap itself is 12” long x 1.5” wide. Optional Rogue Stainless Steel Lat Bar Attachment Fully knurled w/ laser-cut Rogue branding and Black Zinc/Bright Zinc finish. 1.125" diameter, 48" across Optional Tricep Strap & Resistance Band Kit Comes with an assortment of bands for tricep work and gradual adjustments on lat pulldown movements: (2) #0 Orange Monster Bands (15 LB resistance)* (1) #1 Red Monster Band (30 LB)* (1) #2 Blue Monster Band (50 LB)* (1) #3 Green Monster Band (65 LB)* Choice of either (1) Rogue Tricep Strap or (1) Pioneer Leather Tricep Strap *Due to the 41” length of our Monster Bands, we suggest doubling up each band, i.e., feeding the band through the bottom carabiner (attached to the extension strap) until it is centered, then connecting both ends of the band to the top carabiner (attached to the cable). This will greatly increase the resistance beyond the bands’ standard LB increments. Customers interested in lighter weights can also explore our full line-up of Monster Bands, available a la carte. Important: All resistance bands are wear and tear items and should be inspected prior to each and every use. We always recommend that the provided Slinger Band Sheath be used in conjunction with resistance bands on the Monster Slinger. Specifications: Patent Pending Design Rack-Mounted Cable Pulley / Lat Pulldown System Compatible ONLY with Rogue Monster Rack 2.0 and racked Monster Rig 2.0 units Extends 7” out from and above upright to which it is mounted Attachment straps and resistance bands sold separately from standard package User Assembly Required
Video Review
Rogue Fitness has been providing sneak peaks on this system for some time now.
Rogue Fitness is known for making some of the best and most popular gym equipment currently on the market. Their equipment is known for being overbuilt and made to withstand years of abuse whether in garage gym or commercial facility.
This rack-mounted contraption will allow lifters to utilize traditional Lat Pulldown Machine style exercises. Many garage gyms don’t have the luxury or room to host several pieces of accessory equipment beyond a platform and a Monster 2.0 Power Rack, so its nice of Rogue to give these gyms a sharp-looking option.
As stated above, the rack-mounted Slinger is made exclusively for the Monster 2.0 Power Racks and the racked version of the Monster Rig 2.0.
One of the great features about the slinger is the state-of-the-art design. They made sure that it would look like a great add-on to your power rack (not gimmicky). But best of all, the band/cable set-up yields a fluid motion so that no parts will be swinging.
Here are the specs:
· Patent Pending Design
· Made in the USA
· Rack-Mounted Cable Pulley / Lat Pulldown System
· Compatible ONLY with Rogue Monster Rack 2.0 and racked Monster Rig 2.0 units
· Extends 7” out from and above upright to which it is mounted
· Attachment straps and resistance bands sold separately from standard package
· User Assembly Required
· Color is Black
· Length is 22.4” (Extends 7” beyond the face of mounting upright)
· Height is 9.75” (Extends 7” above to of upright)
· Cables are MIL Spec 0.25” Steel Cable
· Optional Grip Strap & Carabiner Pair
· Optional Rogue Stainless Steel Lat Bar Attachment
· Optional Tricep Strap and Resistance Band Kit
The Slinger works by doubling up a Monster Band and attaching it to a carabiner at one end of the rack-mounted extension strap (at the base of the rack) and to the other carabiner that goes to the cable.
The band design prevents swinging as the band pull creates a linear line of resistance between the points of attachment.
Overall, due to the price and build, the Rogue Slinger is sure to be a popular option or add on for those who currently or will purchase a Rogue Monster Rack. It is very clean attachment and will be useful for nearly anyone who wants to go beyond the traditional exercises that you would experience inside of a power rack.
As far as Garage Gym’s go, although this would be nice to have, if you have the room for a separate cable system then this may not be your best choice. Band resistance can be an awesome option for some exercises, but the resistance profile is opposite of what you would want to happen for most single joint and pulling movements (as the band gets “heavier” where mechanically you are weakest). However, if you’re training for the big lifts, it is nice to have a quick option on hand that allows you to do some quick pumping or fun single joint movements.
I’m sure we will see additional accessories or add-ons to be made with the Slinger. An attachable seat with thigh restraints to go onto the power rack would be a great add-on to see!
Rogue Fitness
The rack-mounted Rogue Monster Slinger™ is a new cable-pulley and band resistance system that can deliver the same training benefits of a traditional Lat Pulldown Machine with better space and cost efficiency. Compatible exclusively with Monster 2.0 Power Racks and the racked version of our Monster Rig 2.0, the Monster Slinger package includes adjustable components for set-up on a 90”, 100”, or 108” unit. Customers can also opt to add compatible Rogue attachment straps and bands to their order, sold separately. The Monster Slinger Base Unit includes: (2) Slinger Mounting Plates (2) 6" Cable Pulleys (1) 1/4" MIL Spec Cable with Rogue made hardware (1) Monster Attachment Post + Carabiner (1) Slinger Extension Strap (1) Slinger Band Sheath (2) Carabiners (2) Black Zinc 1" Monster Bolt Assemblies (2) Rubber Grommets Once installed, the front of the Slinger will extend approximately 7" out from the face of the upright it is mounted above, and approximately 7" above the top of that same upright. Optional Grip Strap & Carabiner Pair For customers planning to install the Slinger on a 108” tall rack, this add-on package can help compensate for the cable usage difference, allowing shorter athletes to have a freer range of motion and a more effective workout. The strap itself is 12” long x 1.5” wide. Optional Rogue Stainless Steel Lat Bar Attachment Fully knurled w/ laser-cut Rogue branding and Black Zinc/Bright Zinc finish. 1.125" diameter, 48" across Optional Tricep Strap & Resistance Band Kit Comes with an assortment of bands for tricep work and gradual adjustments on lat pulldown movements: (2) #0 Orange Monster Bands (15 LB resistance)* (1) #1 Red Monster Band (30 LB)* (1) #2 Blue Monster Band (50 LB)* (1) #3 Green Monster Band (65 LB)* Choice of either (1) Rogue Tricep Strap or (1) Pioneer Leather Tricep Strap *Due to the 41” length of our Monster Bands, we suggest doubling up each band, i.e., feeding the band through the bottom carabiner (attached to the extension strap) until it is centered, then connecting both ends of the band to the top carabiner (attached to the cable). This will greatly increase the resistance beyond the bands’ standard LB increments. Customers interested in lighter weights can also explore our full line-up of Monster Bands, available a la carte. Important: All resistance bands are wear and tear items and should be inspected prior to each and every use. We always recommend that the provided Slinger Band Sheath be used in conjunction with resistance bands on the Monster Slinger. Specifications: Patent Pending Design Rack-Mounted Cable Pulley / Lat Pulldown System Compatible ONLY with Rogue Monster Rack 2.0 and racked Monster Rig 2.0 units Extends 7” out from and above upright to which it is mounted Attachment straps and resistance bands sold separately from standard package User Assembly Required
Further reading
The innovative Rogue Monster Slinger from Rogue Fitness has been released. This new cable-pulley and band resistance system will allow you to perform numerous exercises and perhaps save you space by not having a dedicated pulley system. Video Review Rogue Fitness has been providing sneak peaks on this system for some time now. Rogue Fitness is known for making some of the best and most popular gym equipment currently on the market. » Read more about: Rogue Monster Slinger Released! » Read more
Concept 2 has produced some of the most durable pieces of equipment and the Concept 2 SkiErg is no exception. The SkiErg takes the quality of the Concept 2 Rower, but for a different sport, Nordic Skiing. We highly recommend the Concept 2 SkiErg for anyone looking for a long-lasting, highly effective piece of conditioning equipment. Read more
In this Gorilla Bow review, the Garage Gym Reviews team will tell you why this unique resistance band system could be a great add to your home gym. Read more
The Sorinex Bulldog Padis a compact and versatile chest supported row that attaches to a squat rack upright. Although turned off initially by the price, after using the Bulldog Pad, I've come to absolutely love it and use it nearly every training session. If you can afford it and have a squat rack it would work with, I highly recommend it. However, for most home gym owners, it's a luxury. Read more