Rogue Monster Climbing Hold Crossmembers

4.2/5

Builtscore

4.1666666666667 out of 5 based on 6 customer ratings
Based on 6 Ratings

We test and review fitness products based on an independent, multi-point methodology. If you use our links to purchase something, we may earn a commission. Read our disclosures.

PRODUCT HIGHLIGHTS

Rogue’s Monster Climbing Hold Crossmembers can be mounted to any existing Monster Series rack or rig, creating a uniquely customizable, east-west rock climbing station that’s great for beginners or any athlete looking to hone their upper body and grip strength.

These 3×6″ 11 Gauge Steel crossmembers are available in two standard lengths (43″ or 70″) and can also be installed in sequence across a rig to allow for longer runs.

Manufacturer: Category:
Made in USA
Clear

Product Summary

Rogue’s Monster Climbing Hold Crossmembers can be mounted to any existing Monster Series rack or rig, creating a uniquely customizable, east-west rock climbing station that’s great for beginners or any athlete looking to hone their upper body and grip strength.

These 3×6″ 11 Gauge Steel crossmembers are available in two standard lengths (43″ or 70″) and can also be installed in sequence across a rig to allow for longer runs. With holes on the front and back of each beam, users can set-up different hold configurations and alternate from one side to the other for an added challenge. No matter the difficulty level, our texture black powdercoat finish simulates the traction and “stick” of a real rock surface, keeping the holds in place and preventing any sliding or spinning as you advance.

Please Note: The holds themselves are NOT included standard with the crossmembers, BUT a compatible set of holds can be easily added to your order directly from the dropdown menu. The special 8-piece climbing hold set we’re offering is made by Scout Climbing here in Columbus, Ohio, and comes with all necessary 0.375″ hardware for mounting to the crossmembers.

KEY FEATURES OF THE ROGUE CLIMBING HOLD CROSSMEMBERS (MONSTER EDITION)


  • 1 GET A GRIP

    Whether you’re new to rock climbing or just want to train your grip strength and upper body strength in a new way, Rogue’s Hold Crossmembers can give you access to a fully customizable climbing station in your own gym. They’re available in two lengths— 43″ (to fit into the back of your rack or within a 43″ section of a rig) and 70″ (for a rig setup or to daisy chain multiple racks together)—and can also be installed in sequence across a rig to allow for longer runs. With laser-cut holes on both sides of the crossmembers, users can set-up different hold configurations on each side and alternate from the front face to the back for an added challenge.


  • 2 QUALITY ROGUE CONSTRUCTION

    Made in the USA from 3×6″ 11 Gauge Steel, our Monster Hold Crossmembers are compatible with any Rogue Monster Series rig or rack, and come standard with a 4-pack of Monster 1″ x 4.75″ bolt assemblies for easy set-up. There are three rows of holes on both the front and back of each crossmember, spaced 4” on center horizontally and 1.5” vertically (with the center row offset from the top and bottom rows). A quality texture black powdercoat finish is used to simulate the traction and “stick” of a real rock surface, keeping the holds in place as you move from one to another.


  • 3 EXCLUSIVE 8-PIECE HOLD SET, SOLD SEPARATELY

    Customers can opt to add a compatible 8-piece set of climbing holds to their order, made exclusively for Rogue by Scout Climbing of Columbus, Ohio. Brad and his team at Scout have developed a diverse set of quality, polyurethane holds that includes two comfortable jugs, two mini jugs, two crimps, and two amazing slopers. All holds, except the crimps, are designed with a symmetrical feel in mind, and the whole set is crafted for both seasoned climbing enthusiasts and relative beginners. All required 0.375″ hardware for mounting the holds to the crossmembers is included with the Scout set.

Specs

Steel Notes

3×6" 11 Gauge Steel

Type

monster43"climbingholdcrossmember, monster70"climbingholdcrossmember, 8pc.climbingholdsetw.hardware

Other Product Specs

1" Hardware to mount to rack included. Climbing Holds NOT included.

Height

6"

Width

3"

Length

43" or 70"

Color

Black

Made In USA

Yes

GGR Community Reviews

Rogue Monster Climbing Hold Crossmembers

GGR BuiltScore: 4.2/5
4.1666666666667 out of 5

Tried it? Review this product

Leave a Reply

Your email address will not be published.

Use one of the allowed file type: jpg,png,gif. The max size allowed is : 5 MB.